How a rinse-clean dog bed actually works?

“Washable” can mean very different things on a dog-bed label. Sometimes it means only the outer cover fits in a washing machine, while the material underneath can still hold liquid, odor, and debris. A truly practical washable bed separates the parts so each layer can be cleaned in the way that suits it.

The AirNest Support Dog Bed is designed around that idea: the covers are removable, and the non-foam AirNest Core can be rinsed through with water. Here is what that means in everyday use—and how to clean the bed without damaging its support.

Start by understanding the layers

Cleaning is easier when each part has a clear job:

• Outer cover: the everyday contact surface that collects hair, dirt, and body oils.
• Inner cover: an additional removable layer around the support components.
• Top cushion layer: adds surface comfort and should be reshaped gently after washing.
• AirNest Core: the open, three-dimensional support structure that carries and distributes the dog’s weight.

“Fully washable” does not mean putting the assembled bed into one machine. It means the whole sleep system can be cleaned after disassembly: the covers are machine-washed, while the AirNest Core is rinsed with a hose or shower head.

Why an open core releases water more easily

A dense slab has few pathways for water and air. Once liquid reaches the center, it may take a long time to move back out. The AirNest Core is mostly open space supported by an elastic three-dimensional network. Rinse water can travel through the structure, and air can reach far more of its surface during drying.

This does not make drying instant, and conditions still matter. Room humidity, temperature, airflow, and bed size all affect drying time. But an open structure is easier to drain and ventilate than a solid absorbent block.

Routine care: small steps that reduce deep-cleaning work

Most cleaning does not need to begin with a full wash. A simple routine keeps loose material from working deeper into the fabric:

• Shake out or vacuum loose hair and crumbs.
• Blot fresh spills instead of rubbing them into the cover.
• Remove muddy residue after it dries, then clean the remaining mark.
• Wash when the bed looks or smells dirty, after an accident, or more often if your dog sheds heavily, has sensitive skin, or spends a lot of time outdoors.

There is no single washing schedule for every household. A clean indoor dog may need less frequent washing than a puppy in training or a dog that swims, sheds heavily, or comes home with muddy paws.

How to deep-clean the AirNest Support Dog Bed

Step 1: Disassemble the bed

Unzip the outer cover and separate the covers, top cushion layer, and AirNest Core. Check each piece so you can focus cleaning where it is actually needed.

Step 2: Remove dry debris first

Shake or vacuum hair, sand, and crumbs before adding water. This helps prevent loose debris from spreading through the wash or collecting around zippers.

Step 3: Wash the outer and inner covers

Machine wash the covers in cold water on a gentle cycle. Do not bleach. Tumble dry on low or lay flat to dry; do not iron or dry-clean. Closing the zippers before washing can help protect the zipper teeth and surrounding fabric.

Step 4: Rinse the AirNest Core

Use a hose or shower head to rinse through the open structure. Work across the surface so water reaches the affected area and continue until debris and cleaning residue are gone. Do not put the AirNest Core in a washing machine. Do not bleach or tumble dry it.

Step 5: Care for the top cushion layer

Follow the product care instructions for washing. Afterward, gently pat the cushion to restore its shape. Avoid bleaching or ironing, which can distort the layer.

Step 6: Air-dry every part completely

Shake excess water from the AirNest Core and place it where air can reach both sides. Rotate it during drying or use a fan to improve circulation. The core must be air-dried only. Do not use the bed again until the covers, cushion, seams, and core all feel completely dry.

For accidents: clean the source, not just the smell

When an accident happens, remove the dog from the area and blot up as much liquid as possible. Disassemble the bed so you can see how far the moisture traveled. Wash the affected covers and rinse the AirNest Core if liquid reached it. If you use a pet-safe cleaner, rinse away any residue and follow its label.

A fragrance may temporarily cover an odor, but it does not remove the material causing it. Complete rinsing and complete drying are the important steps. Reassembling a bed while even one layer is damp can create a musty smell and undo the cleaning work.

Common cleaning mistakes to avoid

• Washing only the visible cover after a deep spill: inspect the inner layers so odor is not left behind.
• Putting the AirNest Core in a washing machine: rinse it with a hose or shower head instead.
• Using bleach or high heat: these can damage materials and change fit or performance.
• Wringing the cushion: gently pat it back into shape.
• Reassembling too soon: dry every layer completely, including seams and corners.
• Assuming “more detergent” means cleaner: excess product is harder to rinse away and may leave residue.

Why cleanability is part of support—not a separate feature

A bed that is difficult to clean may be replaced early, covered with extra blankets, or left damp after an accident. All three can change how the sleep surface performs. A washable support system lets you clean the parts without depending on loose stuffing that can clump or a solid core that cannot be rinsed through.

AirNest was designed so the same open structure can provide both support and airflow. Cleaning the core does not require removing the support system from service permanently; rinse it, air-dry it completely, and reassemble the bed.

For the official instructions, keep the Fluffy Select Care Guide bookmarked. You can also explore the AirNest Support Dog Bed.

Frequently asked questions

Can I wash the entire assembled bed in a washing machine?

No. Disassemble the bed first. Machine wash the outer and inner covers in cold water on a gentle cycle. Rinse the AirNest Core under a hose or shower head; do not machine wash it.

Can the AirNest Core get wet?

Yes. It is designed to be rinsed clean. Shake off excess water and air-dry it completely before putting the bed back together.

How long will drying take?

Drying time varies with the size of the bed, humidity, temperature, and airflow. Rotate the core so both sides are exposed and use a fan if needed. Judge by complete dryness, not by a fixed number of hours.

Can I use a tumble dryer?

The outer and inner covers may be tumble-dried on low or laid flat. Do not tumble dry the AirNest Core. 

How often should I wash the bed?

Wash based on use rather than a universal calendar. Clean after accidents and when you notice visible dirt or odor. Dogs that shed heavily, spend time outdoors, or have particular hygiene needs may require more frequent care.